Rooftop solar
All-black panels on flashed mounts, conduit run inside the attic where the framing allows, and no visible wire on the roof face.
- Panel400 W all-black
- Efficiency21.8%
- Product warranty25 yr
- Wind rating140 mph
Home solar, storage & EV
The roof you already own can run the whole house.
Solar, batteries and EV charging for your home, designed and installed by crews who have been climbing roofs since 2011.
- Homes powered
- 6,400+
- Workmanship warranty
- 25 years
- Typical install
- 1–2 days
- In business since
- 2011
Sunlight in, bill down
Start with the number you already know.
Move your average power bill and we will size the array, count the panels and show you the shape of a July day on your roof.
$180 / month
Numbers are modeled on regional irradiance (about 1,600 kWh per installed kW per year) and a 12¢ blended rate. Your real design comes from a roof measurement and 12 months of your utility data.
Production on a clear July day
kWh per hour
17 kWh
4a8a12p5p9p
- System size
- 11.2 kW
- Panels on the roof
- 28
- Bill offset
- 100%
- Est. 25-yr gross savings
- $66,900
What we install
Three pieces. One system.
Buy the whole thing at once or add pieces as you go. Every Action Energy design leaves room for the next one.
Battery storage
Keeps the lights, furnace fan and fridge running through a storm outage, then buys back the evening peak instead of the grid.
- Usable capacity13.5 kWh
- Continuous output5 kW
- Backup transfer< 1 sec
- StackableUp to 3 units
EV charging
A 48-amp circuit set while the electrician is already in your panel. The cheapest day to add a charger is install day.
- Charge rateUp to 44 mi/hr
- Circuit60 A / 240 V
- Solar-priority modeIncluded
- Install add-onSame visit
How it works
Five weeks, four visits, one shutdown.
The order matters here, so here it is in order, including the parts that are just waiting.
01
Roof and panel review
We measure the roof, photograph the main panel and pull your last 12 utility bills. You get a layout with real panel positions, not a stock rendering.
Day 1 · 90 min
02
Design and proposal
Production model, offset, financing options and the final price on one page. Nothing moves until you sign it.
Days 2–5
03
Permits and utility application
City building permit and the interconnection application with your utility. This is the waiting part. We file it, then we chase it.
Weeks 2–4
04
Installation
Crew arrives at 7am. Power is off for roughly two hours while the panel is tied in. Most homes finish the same day.
1–2 days
05
Inspection and switch-on
City inspection, then permission to operate from the utility. We turn the system on with you standing there and set up monitoring on your phone.
Week 5
Equipment
Built to sit on a roof for 25 winters.
Everything we install is rated for real temperature swings: 100°F attic heat in summer, snow load and freeze-thaw in winter. Same equipment on every job, so our crews know it cold.
| Panel output | 400 W |
|---|---|
| Cell type | Monocrystalline |
| Temperature coefficient | −0.29 %/°C |
| Snow load rating | 5,400 Pa |
| Inverter | Microinverter, per panel |
| Monitoring | Panel-level, app + web |
| Roof penetrations | Flashed, 25-yr leak warranty |
Owners, not leads
The crew that installs it is the crew that comes back.
Crews work out of regional offices across every market we are licensed in. Send an address and we will tell you which crew covers it and what the local utility requires.
Find out what your roof would make.
Send an address and we will pull the satellite imagery, model the array and call you back with a number, usually within a business day.
Run the estimate first →